This gearmotor consists of a low-power, 6 V brushed DC motor combined with a 103.07:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. At 6V, the speed is 6,00..
This gearmotor consists of a medium-power, 12 V brushed DC motor combined with a 103.07:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. At 12V, the speed is..
This gearmotor is a powerful brushed DC motor with 10:1 metal gearbox intended for operation at 6V or 12V. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft.When the working voltage of the DC gear motor is 12V, the motor rotation speed is 11,000 rpm before the motor is decelerated. ..
INTRODUCTIONThis is a general OLED display Module, 0.91inch diagonal, 128 * 32 pixels, with embedded controller, communicating via I2C interface.FEATURES0.91inch small form factor128*32 high resolutionI2C interface, requires only two signal pinsComes with development resources and manual (examples f..
PN532 is a highly integrated non-contact read-write chip, which contains the 80C51 microcontroller core (this 8051 user cannot program it, it is a low-level communication protocol stack for built-in NFC), which integrates each of the 13.56MHz an active / passive contactless communication method and ..
PN532 is a highly integrated non-contact read-write chip, which contains the 80C51 microcontroller core (this 8051 user cannot program it, it is a low-level communication protocol stack for built-in NFC), which integrates each of the 13.56MHz an active / passive contactless communication method and ..
This gearmotor is a powerful brushed DC motor with 131.3:1 metal gearbox intended for operation at 24V. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. At 24V, the speed is 10,000 rpm before the motor decelerates.Wiki: http://www.cqrobot.wiki/index.php/DC_Gearmotor_SKU:_CQR3..
This gearmotor is a powerful brushed DC motor with 131.3:1 metal gearbox intended for operation at 6V or 12V. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft.When the working voltage of the DC gear motor is 12V, the motor rotation speed is 11,000 rpm before the motor is decelerate..
This gearmotor is a powerful brushed DC motor with 150:1 metal gearbox intended for operation at 24V. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. At 24V, the speed is 10,000 rpm before the motor decelerates.Wiki: http://www.cqrobot.wiki/index.php/DC_Gearmotor_SKU:_CQR37D..
This gearmotor is a powerful brushed DC motor with 150:1 metal gearbox intended for operation at 6V or 12V. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft.When the working voltage of the DC gear motor is 12V, the motor rotation speed is 11,000 rpm before the motor is decelerated...
This gearmotor consists of a high-power, 12 V brushed DC motor combined with a 164.63:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. At 12V, the speed is 1..
This gearmotor consists of a medium-power, 12 V brushed DC motor combined with a 164.63:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. At 12V, the speed is..