The Arduino DMX shield is an add-on (or "shield") for the Arduino. It is an easy way to use the Arduino as a DMX-Master device, just by adding the DMX-shield on the top of the Arduino.This DMX / RDM Shield is a low cost high quality solution that allows you to connect your Arduino driven artwork int..
INTRODUCTION This battery holder can hold 3 AA batteries which provides 3.6V rechargeable battery pack with NiMH / NiCd cells or 4.5V battery pack with Alkaline cells. You will be able to power your Arduino with this battery holder via MicroUSB interface directly. SPECIFICATION - Cell Quantity: 3 - ..
The AngelDT-9000DE converter is compatible with RS-232 and RS-485 standards. It converts the RS-232 communication interface into a two-wire half-duplex RS-485 communication interface. It has a built-in fast transient voltage suppression protector TVS and a unique internal use The "RS-232 charge pump..
The AngelDT-9000DE converter is compatible with RS-232 and RS-485 standards. It converts the RS-232 communication interface into a two-wire half-duplex RS-485 communication interface. It has a built-in fast transient voltage suppression protector TVS and a unique internal use The "RS-232 charge pump..
CQRobot painstakingly deploys this passive speaker small speaker for the Makers and electronic enthusiasts, this small passive speaker with JST PH2.0 interface, the internal resistance is 8 ohms, the power of it is 3 watts. Strip size, with mounting screw, suitable for all kinds of sound source fabr..
This gearmotor is a powerful brushed DC motor with 43.8:1 metal gearbox intended for operation at 24V. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. At 24V, the speed is 10,000 rpm before the motor decelerates.Wiki: http://www.cqrobot.wiki/index.php/DC_Gearmotor_SKU:_CQR37..
This gearmotor consists of a low-power, 6 V brushed DC motor combined with a 98.78:1 metal spur gearbox, and it has an integrated 48 CPR quadrature encoder on the motor shaft, which provides 4741.44 counts per revolution of the gearbox’s output shaft. The gearmotor is cylindrical, with a diameter ju..
This gearmotor is a powerful brushed DC motor with 10:1 metal gearbox intended for operation at 24V. These units have a 16 mm-long, 6 mm-diameter D-shaped output shaft. At 24V, the speed is 10,000 rpm before the motor decelerates.Wiki: http://www.cqrobot.wiki/index.php/DC_Gearmotor_SKU:_CQR37DN..
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 164.63:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. At 6V, the speed is 10,..
This gearmotor consists of a low-power, 12 V brushed DC motor combined with a 164.63:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. At 12V, the speed is 57..
This gearmotor consists of a low-power, 6 V brushed DC motor combined with a 164.63:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. At 6V, the speed is 6,00..
This gearmotor consists of a high-power, 6 V brushed DC motor combined with a 171.79:1 metal spur gearbox. The gearmotor is cylindrical, with a diameter just under 25 mm, and the D-shaped output shaft is 4 mm in diameter and extends 12.5 mm from the face plate of the gearbox. At 6V, the speed is 10,..