Menu
Your Cart

Industrial Grade RS232 to RS485 Passive Bidirectional Converter

Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
Industrial Grade RS232 to RS485 Passive Bidirectional Converter
$5.48
Ex Tax: $5.48
  • Stock: In Stock
  • Brand: Pzsmocn
  • Model: PZSSAB001
  • Weight: 88.00g
  • SKU: PZSSAB001
  • ASIN: B08J2RDSQP

This converter is compatible with RS-232 and RS-485 standards, and can convert single-ended RS-232 signals into balanced differential RS-485 signals. The communication distance can reach 1.2 kilometers. Built-in TVS, support 600W anti-surge and 15KV electrostatic protection, driven by RS-232 charge pump, it can be turned on without external power supply. The built-in zero-delay automatic transceiver conversion I/O circuit can automatically control the data flow without any handshake signal.

APPLICATION

  • Industrial automation control systems
  • All-in-one cards
  • Access control systems
  • Consumer systems
  • Attendance systems
  • Parking lot systems
  • Self-service banking systems
  • Traffic system

Note

In the case of insufficient power supply, the active RS485 converter DTE (Data Terminal Equipment) needs to be replaced

SPECIFICATION

  • Product Name: RS232 to RS485 passive two way converter
  • Specification: DB9 female (threaded) / RS485, black
  • Interface Characteristics: Compatible with EIA / TIA's RS-232C and RS-485 standards
  • Working Mode: asynchronous half-duplex differential transmission
  • Transmission Rate: 300bps to 115.2Kbps
  • Transmission Medium: twisted pair wire (wire diameter Plus/Minus 0.5MM) or shielded wire
  • Transmission Distance: RS485 end is less than 1200 meters; RS232 end is less than 15 meters
  • Safety Protection: RS485 interface 60OW lightning surge protection per line
  • Working Environment: -20 to +70 degrees Celsius, relative humidity 5 percent to 95 percent

DISTRIBUTION LIST

1 * RS232 to RS485 Passive Bidirectional Converter

Write a review

Note: HTML is not translated!
Bad Good