Menu
Your Cart

Passive Speaker 4Ω 3W, JST-PH2.0 Interface.

Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
Passive Speaker 4Ω 3W, JST-PH2.0 Interface.

Passive Speaker 4Ω 3W, JST-PH2.0 Interface.
$3.99
Ex Tax: $3.99
10 or more $3.88
50 or more $3.58
100 or more $2.99
  • Stock: In Stock
  • Brand: CQRobot
  • Model: CQRLB4O3W-A
  • Weight: 78.00g
  • SKU: CQRLB4O3W-A
  • ASIN: B0822Z4LPH

CQRobot painstakingly deploys this passive speaker small speaker for the Makers and electronic enthusiasts, this small passive speaker with JST PH2.0 interface, the internal resistance is 4 ohms, the power of it is 3 watts. Strip size, with mounting screw, suitable for all kinds of sound source fabrication, the sound is clear and melodious without distortion.

APPLICATION

  • Arduino, Raspberry Pi
  • Advertising Machine, Robot, Game Machine
  • Integrated Machine Special Speaker

TECHNICAL SPECIFICATIONS

  • Resonance Frequency: 500 Plus/Minus 20% Hz.
  • Impedance: 4 Ohm Plus/Minus 15% at 1 khz 1.0V.
  • Power: rated power / maximum power 2.0W / 3.0W
  • Sensitivity: 82 Plus/Minus 3dB (1w / 0.5m) at 1.0K Hz.
  • Effective frequency range: FO to 15 KHz.
  • Distortion factor: Less Than 5% MAX. (AT 1.0KHz 0.5W 0.5M)
  • Polarity: When a positive DC current is applied to the terminal marked +, the diaphragm shall move forward.
  • Buzz & rattle test: 4.0V FO to 15KHz.
  • High Temperature Storage Test: 80 Degree Celsius Plus/Minus 5 Degree Celsius - 96 Hours.
  • Low Temperature Storage Test: -40 Degree Celsius Plus/Minus 5 Degree Celsius - 96 Hours.
  • Magnet: Nd-Fe-B, 12.5mm * 2mm.
  • Size: 70mm * 31mm * 16mm.
  • Screw hole distance: 24mm * 63mm.
  • Interface: JST PH2.0 2-Pin.
  • Interface cable length: 40cm.
  • Total weight: 24g.

SHIPPING LIST

2 * Passive Speaker 4Ω 3W (JST PH2.0 2-Pin)

Write a review

Note: HTML is not translated!
Bad Good