Passive Speaker 8Ω 3W, JST-PH2.0 Interface.

CQRobot painstakingly deploys this passive speaker small speaker for the Makers and electronic enthusiasts, this small passive speaker with JST PH2.0 interface, the internal resistance is 8 ohms, the power of it is 3 watts. Strip size, with mounting screw, suitable for all kinds of sound source fabrication, the sound is clear and melodious without distortion.

APPLICATION

• Arduino, Raspberry Pi
• Advertising Machine, Robot, Game Machine
• Integrated Machine Special Speaker

TECHNICAL SPECIFICATIONS

• Impedance: 8 Ohm Plus/Minus 15% at 1000Hz.1V
• Power Rating: Rated Power / Maximum Power 3.0W / 3.5W
• FO: 450Hz Plus/Minus 150Hz at 1.0V
• S.P.L: 94dB Plus/Minus 3dB/1.0 Watt 0.1Meter; Average At1000, 1200, 1500, 2000Hz.
• Frequency Range: FO to 10,000Hz. Average SPL-10dB.
• Distortion: 10% Maximum at 1000Hz.1.0V.
• Abnormal Sound Test: Must be Normal Tested by 4.9; Volts.Sine wave for 50 to 5KHZ.
• Polarity: Diaphragm Shall Move Forward When Apply a Positive DC. Red "+" or "Marked" Terminal.
• Operating Temperature: -25 Degree Celsius to +65 Degree Celsius.
• Storage Temperature: -25 Degree Celsius to +65 Degree Celsius.
• High Temperature Storage Test: 65 Degree Celsius Plus/Minus 2 Degree Celsius - 96 Hours.
• Low Temperature Storage Test: -25 Degree Celsius Plus/Minus 2 Degree Celsius - 96 Hours.
• Size: 70mm * 31mm * 16mm.
• Screw hole distance: 24mm * 63mm.
• Interface: JST PH2.0 2-Pin.
• Interface cable length: 40cm.
• Total weight: 24g.

SHIPPING LIST

2 * Passive Speaker 8Ω 3W (JST-PH2.0 Interface)