Menu
Your Cart

Shake Sensor for Raspberry Pi and Arduino

Shake Sensor for Raspberry Pi and Arduino
Shake Sensor for Raspberry Pi and Arduino
Shake Sensor for Raspberry Pi and Arduino
Shake Sensor for Raspberry Pi and Arduino
Shake Sensor for Raspberry Pi and Arduino
Shake Sensor for Raspberry Pi and Arduino
Shake Sensor for Raspberry Pi and Arduino
Shake Sensor for Raspberry Pi and Arduino
Shake Sensor for Raspberry Pi and Arduino
Shake Sensor for Raspberry Pi and Arduino
Shake Sensor for Raspberry Pi and Arduino
Shake Sensor for Raspberry Pi and Arduino
Shake Sensor for Raspberry Pi and Arduino
$2.48
Ex Tax: $2.48
  • Stock: In Stock
  • Brand: Pzsmocn
  • Model: PZSHDC001
  • Weight: 78.00g
  • SKU: PZSHDC001
  • ASIN: B08K448MCF

The vibration sensor is a digital sensor that is only sensitive to one-way manual swing. Adopt spring-type vibration switch, output high level when stationary, when the user shakes strongly in the specified direction once, the module outputs a low level pulse, and the onboard indicator light flashes at the same time. Thanks to the unidirectional sensitivity characteristics of the vibration switch and the corresponding filter circuit, medium-strength collisions or vibrations (such as drops, shocks) will not trigger an interrupt signal by mistake, and have strong anti-shock interference capabilities. Just shake and wave, all kinds of switch control are in your hand.

The module comes with a JST PA SMT 3-Pin horizontal sticker and a buckle socket. Also, a JST PA to DuPont female 3-Pin single-head wire is offered to facilitate wiring. Length: 210mm, buckle attached.

FEATURES

  • Sensitive in one direction, strong anti-impact interference, preventing false triggering
  • Compatible with 3.3V/5V controller
  • Exquisite and compact, easy to install

SPECIFICATIONS

  • Sensor Specifications:
    • Input Voltage: 3.3V-5.0V
    • Switch Life: more than 200,000 times
    • Communication Interface: JST PA SMT 3-Pin interface
    • Dimensions: 30mm * 22mm
    • Mounting Hole Size: 3mm
    • Installation Hole Spacing: 15mm
  • Wire Specifications:
    • Withstand Voltage: less than 50V
    • Withstand Current: less than 1000MA
    • Length: 21CM
    • Wire Sequence: Black-Negative power supply, Red-Positive power supply, Green-Digital signal output (Stand still - High level, Shaking - Low-level pulse)

DISTRIBUTION LIST

1 * Digital Shake Sensor

1 * JST-PA to DuPont 3P Wire

Write a review

Note: HTML is not translated!
Bad Good